Reverse impression technique: A fully digital protocol for the fabrication of the definitive fixed prosthesis for completely edentulous patients
In complete arch implant rehabilitation, one of the greatest difficulties still encountered in the digital workflow is the deviation of the implant position during intraoral scanner (IOS) data acquisition. As a result, the passivity of a definitive prosthesis fabricated using IOS data might be compromised. Thus, an implant position verification method is essential, either digitally or conventionally executed. A fully digital protocol for the fabrication of the definitive fixed prosthesis for completely edentulous patients, without the interference of any conventional step within the digital process, is presented. For the verification of the captured position of the scanbodies, novel scan analogs were connected to the interim prosthesis extraorally and scanned. The virtual superimposition of the interim prosthesis intraorally with the same prosthesis extraorally served as a verification device for the position of the implants.
Case solved by Dental Design
Case solved with Reference Scanbody by Klinika Niewiński
Case 2 solved with Reference Scanbody by Klinika Niewiński
SURGICAL GUIDE DAS KIT and DAS MULTI-UNIT SYSTEM
DAS Guided Surgical Kit and DAS Multi Unit
Case solved by Stomatologia Pastor with the new DAS Guided Surgical Kit
👉 Case solved by Dr. Sławomir Pastor from @stomatologiapastor with the new DAS Guided Surgical Kit and Exoplan software.
New case solved with the Guided DAS Surgical Kit
Another case solved with the Guided DAS Surgical Kit. It was carried out by Dr. Juan Ballesteros using Implant Studio software.
IDEX Istanbul 2023
From 25 to 28 May, we had the pleasure of presenting our latest innovations at IDEX Istanbul 2023. Thank you for receiving us!
Guided surgery case by Dr. Sławomir Pastor, Poland
This is another case solved by Dr. Sławomir Pastor from Stomatologia Pastor, Poland with Exoplan software.