Achieving Esthetics, Function, and Retrievability with Implant-Supported Monolithic Zirconia Restorations While Minimizing Surgical Interventions

dynamicabutmentCase studies, DYNAMIC ABUTMENT, DYNAMIC ABUTMENT, News, Technical studios

This article describes an abutment (Dynamic Abutment, Dynamic Abutment Solutions) that allows deviation to the axis of the implant by up to 30 degrees and its use in conjuntion with monolithic zirconia restorations. The nonaxial engagement of the retaining screw is facilitated by a screwdriver with a hexolobular driver tip that corresponds to the design of the screw. This allows …

Discover the safety from Dynamic Abutment® Solutions System

dynamicabutmentDYNAMIC ABUTMENT, News, Technical studios

An evaluation from the flexural-torsional resistance of the Screwdriver set of 3.0 Dynamic Abutment® System has been carried out simulating real working conditions. Stages during the flexural-torsional test, supported by the 3.0 Dynamic Abutment® Screwdriver: PROPORTIONAL LIMIT STRESS: Highest stress at which stress is directly proportional to strain. It is the highest stress at which the curve in a stress-strain diagram is …

STUDY OF THE INFLUENCE OF ABUTMENT ANGULATION ON SCREW FRACTURE-STRENGHT AND REMOVAL TORQUE

dynamicabutmentDYNAMIC ABUTMENT, News, PRODUCT DYNAMIC ABUTMENT

It is a pleasure to share with all of you a poster on a study made by Doctors Tiffany Lee , Jack Goldberg , Jin Ho Phark , Eva Berroeta and Winston Chee from the Advanced Prosthodontic Dentistry, Herman Ostrow School of Dentistry of USC, University of Southern California, Los Angeles, USA.   It is a great honor for our …

Dynamic Abutment: A method of redirecting screw access for implant-supported restorations: Technical details and a clinical report

superadminCase studies, DYNAMIC ABUTMENT, DYNAMIC ABUTMENT, PRODUCT DYNAMIC ABUTMENT

The esthetic outcome of implant-supported restorations is affected by the implant position. A well-placed implant will allow appropriate contours of the restoration and together with an adequate volume of soft tissue will result in a functional and esthetic restoration. When a screwretained restoration is anticipated, an implant that is angled too far facially would be esthetically unacceptable. In 2004, an …

Static and fatigue flexo compression assembly resistance results: dental implant Dynamic Titanium Bases

superadminDYNAMIC ABUTMENT, DYNAMIC ABUTMENT, Product information

The present report presents the results for the flexo-compression static and fatigue simulation study, for a set of Dynamic Titanium Bases and dental implant of Multi-Unit Connection type Nobel Biocare Brand Regular Abutment The Multi-Unit model implemented uses a M1.4 screw, which is the most crucial of all those used. Download file    

Life cycles analysis of the Dynamic Abutment® 3.0 system composed of hexalobular screw and screwdriver at 30º

superadminDYNAMIC ABUTMENT, Technical studios

Make studies of the resistance with the torque machine and studies of the life cycles in different situations with clinical motor, on screw and screwdrivers of the new hexalobular 3.0 Dynamic Abutment system with angulation up to 30⁰. The results obtained show that the screw and screwdriver set, support a work load lower than 30N·cm without having problems. Download article

Results of flexocompression static of Dynamic Abutment® at 20º and Dynamic Abutment® 3.0 at 28º

superadminDYNAMIC ABUTMENT, Technical studios

The present comparative report gathers the results corresponding to the FlexoCompression static and fatigue simulation study for the two sets of Dynamic Abutments® and dental implant with an external connection, from Nobel Biocare Branemark System Regular Platform. The study was undertaken with two systems at different angles: one at 20º (Dynamic Abutment® system) and the other at 28º (Dynamic Abutment® …

AIDO Finite elements structural analysis of the TPD2

superadminDYNAMIC ABUTMENT, Technical studios

This report concerns the last stage of the studies performed on the TPD-2f screw for the project TILITE TALLADIUM ESPAÑA for the company Talladium España and carried out for the AIDO Asociación Industrial de Óptica, Color e Imagen. This last stage considers the final structural analysis with the aim of verifying the modifications carried out on the design of the …